Edelbrock 1308 Carburetor

Brand:Edelbrock Part Number:1308 Category:Carburetor Medium Description: Short Description: SKU:57994528 Availability:Out of Stock Manufactured in:United States
Price: $19.50 CAD
Edelbrock VRS-4150 Race & Performance Carburetor #1308 850 CFM is street friendly but race ready. The one-piece, cast aluminum body fits all 4150 and 4500 carb flange manifolds without requiring an adapter plate. A street throttle arm, Moly-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to this carburetor that are ideal for any user. Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds. All of these features make for easy tuning and great versatility in many applications. The 20% larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles. The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration. VRS carburetors allow users to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop. The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts. Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response. Finally, for greater control at high RPM, the high speed/main fuel circuit is split into two bleed circuits – one each for the lower and upper sections. As an additional feature, the power valves are located on both primaries and secondaries that support optimized jetting. The power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires.

Carburetor

Attributes

Jet Extenders:
Yes- Secondary Side
Main Venturi Diameter:
1.39 IN
Standard Vacuum:
2 - 3/8" dia. and 2- 3/16" dia
Body Height:
3.75 IN
Barrel Quantity:
4 Barrel
Secondary Power Valve:
Yes
Gasket Or Seal Included:
Yes
Maximum Flow Rating:
850 2L
EGR Port:
N/A
Secondaries:
Mechanical
Bore Diameter:
1.750 IN
Accel Pump Well Size:
50 CC
RGL:
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Flange Shape:
4150 and 4500
Condition:
New
Intermediate Circuit:
Yes
Metering Block:
Billet- Four Circuit IN
Ported Timed Vacuum:
Yes (3/16)
Series:
VRS-4150
Finish:
Bead Blast
Primary Power Valve:
Yes
Choke Type:
N/A

Package Information

Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00085347013081Package Bar Code:00085347013081Weight Variance:0.000000000Stacking Factor:0Inner Quantity:1 Each

Extended Information

Core Return Days to Expiry:0Country of Origin (Primary):USEmission Code:Not in CAHarmonized Tariff Code (HTS):8708996800Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderNAFTA Preference Criterion Code:Criteria BNational Popularity Code:New Item 3 Months, 6 Months, etc.National Popularity Description:New Item 3 Months, 6 Months, etc.Refurbished Part:NoRemanufactured Part:NoTaxable:YesWarranty Time:12Warranty Time UOM:Month
Vehicle Applications
YearsMakeModelTrimEngineDriveNotes